FoxFury Taker B30 Ballistic Shield Light
The FoxFury Taker B30 is a retrofittable, front mounted 1000 lumen, High CRI LED light for ballistic shields. This strobe-capable shield light provides tactical officers with panoramic lighting and immediate situation assessment to see and respond faster.
The Taker B30 is among the lowest profile aftermarket shield lights. It is equipped with a single pressure switch that activates the light and changes modes. This light has dual settings: On/Off and Tactical (3 modes: Momentary, Continuous On, and disorienting Turbo-Strobe). It comes with a Kill Switch feature, which allows the operator to lock out the light from unintentional activation. The Taker B30 mounts to the front of ballistic shields via industrial strength reclosable fasteners (Velcro), which means no drilling into the shield and no compromising shield ballistics.
The lightweight B30 is powered by 18650, CR123 or RCR123 batteries. The ultra-durable B30 is waterproof, flame resistant, and designed for use in anti-riot situations along with dynamic and deliberate entries by SWAT, military special operations, and law enforcement around the globe.
Retrofittable Design
This light and battery pack can quickly and effectively be front mounted to shields via the included industrial 3M Dual Lock Strips (or VELCRO mounted). This allows the light to be used and removed without causing permanent changes (holes) to the shield.
Durability
FoxFury shield lights are fully waterproof, fire-resistant, impact-resistant and can be used in all-weather situations. They will hold up in challenging environments and can even be decontaminated if needed.
Panoramic Light
A wider beam angle provides panoramic lighting and immediate situation assessment so that you can see and respond faster. This is helpful in close quarters (hallways and doorways).
Kill Switch
This light comes with a kill switch feature. It allows the operator to lock out the light from unintentional activation.
Pressure Switch Activation
This model comes equipped with a single pressure switch, which is used to activate the light and change modes.
Specifications
| Lumens | 1000 Lumens, High CRI 90 |
| Battery Life | Momentary: 2.5 hours (with 2x 18650 Batteries), 1.5 hours (with 4xCR123 Batteries); Continuous On: 2.5 hours (with 2x 18650 Batteries), 1.5 hours (with 4xCR123 Batteries); Turbo-Strobe: 4 hours (with 2 x 18650 Batteries), 1.5 hours (with 4 x CR123 Batteries) |
| Power Source | (2) 18650 batteries or (4) CR123 or (4) RCR123 batteries - not included |
| Modes | 3 (Momentary, Continuous On, Turbo-Strobe) or 1 (On/Off) |
| Total Weight w/Batteries | 11.4 oz (322.4 g) - with 4 x CR123 12.5 oz (353.8 g) - with 2 x 18650 |
| Dimensions Light Head | 3.9 x 0.9 x 2.0 in (100 x 23 x 50 mm) |
| Dimensions Battery Pack | 5.3 x 1.2 x 2.2 in (135 x 31 x 56 mm) |
| Certifications | CE, UKCA |
| Ingress Protection | IPX7 |
| Fire Resistant | Meets NFPA Requirements |
| Waterproof | 33 ft (10 m) |
| Impact Resistant | 9.8 ft (3 m) |
| LED Color | White |
| Color Temperature & CRI | 5000K, CRI 90 |
| Operating Temperature | -4°F (-20°C) to 300°F (149°C) |
| Materials | Black anodized light head, polycarbonate lens, wiring: heavy duty steel braided cable, black nylon 66 protective sleeve |
| Max Beam Distance | 841 ft (256 m) |
| Features | Fits most ballistic shields
Single switch operation Turbo-Strobe mode Power kill switch Replaceable lens Steel braided cable Two programmed mode settings: either 3 tactical modes or on/off Renders color more accurately and improves visibility |
| Warranty | Limited Lifetime Warranty |
| What's Included | Taker B30 Light, (6) 3M Dual Lock Strips, (8) Shield Light Cable Clips, Black Cable Sleeve, Pressure Switch |
